News
Super Sticky: 秘密直播 APL Creates Strong, Fast, Waterproof Adhesive
In the modern world, adhesives are largely considered a solved problem. Even underwater, glues can be used in a wide range of maritime applications.
Thing is, they鈥檙e just not that effective.
The problem 鈥 as researchers at the 秘密直播 Applied Physics Laboratory (APL) in Laurel, Maryland, saw it 鈥 was the slow cure rate of polyurethane. Even the toughest glues struggle to handle interstitial water, and most work best on pretreated surfaces, both of which are challenges in an underwater environment. They also typically take at least 24 hours to properly cure, an obvious problem if what you鈥檙e trying to glue is submerged.
鈥淵ou can imagine in a marine environment how needing 24 hours to cure and hold at full strength could be an issue,鈥 said Reid Messersmith, a chemist in the Research and Exploratory Development Department (REDD) and the lead author on a new paper, 鈥.鈥
鈥淪o, we made it strong and fast,鈥 Messersmith continued. 鈥淔rom 24 hours to one minute was our speed increase, and if you can actually let it sit for 24 hours, it鈥檒l hold at 10 times the strength.鈥
The team examined ways to improve commercial glue for underwater use and found that adding a catalyst (to make it hold quickly) and a crosslinker (to make the hold strong) to the glue鈥檚 original formula would enhance it, and it would hold immediately. This doesn鈥檛 work in practice, though, because there needs to be a slight lag time between when the glue is applied and when it begins to cure 鈥 in case, for example, you need to stick something else to the glue before it solidifies.
The solution was to house the catalyst and crosslinker in a shell, a microcapsule akin to an eggshell. When you mix the filled shell into the glue, nothing happens. But when a small amount of force is applied, such as rubbing it between your fingers, the shells break, the catalyst and the crosslinker leak out and the glue solidifies immediately.
The result is a rapidly curing underwater adhesive that is effective on a range of surfaces, including aluminum, stainless steel, glass and plastic. The adhesive performed best on untreated aluminum surfaces with a high bonding strength of approximately 400 pounds in 60 seconds.
鈥淗aving a pressure-activated, high-strength adhesive that works in minutes has myriad potential applications,鈥 said Chris Hoffman, the project manager in REDD and a co-author on the paper. 鈥淥ur adhesive works great both in and out of water, so you can imagine using it to repair your boat or reattach shingles. The ease with which our microcapsules can be applied to an existing glue is a significant added bonus.鈥
The key step to making a useful glue additive is washing away unwanted oils and byproducts produced when creating the microcapsules. As detailed in the paper, the team compared two washing methods and found a way to produce a dry, white powder that is easy to handle and shelf stable. This microcapsule powder can simply be mixed into the base resin, and only a small amount of force needs to be applied to rupture the capsules as the two pieces are pressed together.
鈥淢echanoresponsive microcapsules with a polyurea shell released their liquid core contents 鈥 leading to the rapid curing of the isocyanate resins underwater,鈥 the authors concluded. 鈥淭he microcapsules were formed in roughly 50-gram batches by a method that can be scaled up for commercial production. The dry powder produced [in our second wash method] is easy to handle and shelf stable for extended periods of time.鈥
While the presence of water increases the difficulty of adhering to surfaces, they added, the isocyanate/microcapsule mixture performed exceptionally well in this challenging environment.
The team .